Compact high voltage power supply for laboratory use.
it is Adjustable up to 10 kV.
Lab Mate high voltage power supply from Spruce Science will give you a whole new level of performance and portability. Wherever your ideas take you, you will get there faster than ever. With the best feedback loop, you will have the greatest control over the precision high voltage power supply output.
Lab Mate: 10kV High Voltage Power Supply
- Compact benchtop high voltage power supply.
- You can adjust the DC high voltage output up to 10 kV.
- Or you can vary the current output up to 2 mA.
- Regulated high voltage output.
- Ripple (0.01%), accuracy (1%) and stability (0.01%/Hr).
- Simple yet elegant front panel design is easy for you to use.
- Remote control of the precision high voltage power supply is also possible.
- Fully integrated power supply to minimize your setup time. You get going faster.
- You will find the HVPS useful for benchtop experiments during product development, in research laboratory, universities, and general experimentation involving high voltage.
- At the same time, the form factor is compact and lightweight so you will also find the precision high voltage power supply ready for rack mount during quality control, testing and production environments.
Lab Mate high voltage power supply is compact and can produce up to 10 kV at 2 mA.
Lab Mate high voltage power supply is the benchtop equipment that is adjustable up to 10 kV and 2 mA maximum output. It is a switching power supply that converts low voltage DC (Direct Current) into regulated high voltage DC. It is incredibly simple to use with intuitive design features meant to get you started quickly. All that is required to get started is for you to plug-in and intuitively control everything from the front panel. The dual adjustment dials and 5-digits displays located on the front panel will give you precise control of the output voltage level. The feedback loop is fine-tuned to give you regulated high voltage output with 1% accuracy.
Lab Mate high voltage power supply can be operated in either constant voltage mode or constant current mode. The maximum voltage output produced by the high voltage DC power supply is 10 kV and the output can be adjusted from 0 to 10 kV. The current output can be varied from 0 to the full rated current of 2 mA.
Remote control operation of Lab Mate high voltage power supply is possible and you can access the remote features through the remote connector located on the front panel. The connection is accessed through the micro HDMI Type-D receptacle and the remote enable pin will give you full remote control of the power supply.
We understand that space is always limited because even the simplest of experiments require many other devices and instruments so, with that in mind, we developed this high voltage power supply in the smallest size possible. This benchtop equipment is the most compact footprint on the market, leaving you plenty of room to conduct your experiments. Above all, the compact form factor will reduce clutter and integrate easily into your space-constrained systems.
We aim to provide a wholesome product by incorporating a high voltage cable with the connector assembly included as standard. The high voltage cable and connector assembly is rated up to the maximum rated voltage of 10 kV. The whole cable assembly is shielded with a robust stainless steel shell to provide you an additional safety layer and to help prevent physical damage to the high voltage wire insulation. Another benefit of the ground shield is that it helps to prevent capacitive charging and coupling that becomes problematic when operating at high voltages.
It is essential to have the capability to generate high voltages and electrical field strengths in your lab for scientific development since high gradient electric fields can be used to develop new technology and discover more about the nature of the universe. What Spruce Science offers is a great quality benchtop high voltage switching power supply that is safe and reliable. Our product provides great control over the output so you can focus on the end results instead. In the long run, utilizing a fully integrated precision high voltage power supply from Spruce Science will allow your business to save time and money.
The state-of-the-art precision high voltage power supply from Spruce Science is optimized for performance so if you need to produce high voltage reliably then let us start a new project together.
Lab Mate high voltage power supply will give you practical results.
- Ripple (0.01%)
- Accuracy (1%)
- Stability (0.01%/Hr)
Detailed specifications for Lab Mate high voltage power supply are given in Specifications section.
Size and weight
Lab Mate vs iPhone XR
Size Reference
Rack mount holder for Lab Mate high voltage power supply.
Lab Mate is versatile and can be configured for 19 inch rack.
Front panel design gives you intuitive control of high voltage output.
- The front panel have all the essential controls and feedback to operate the precision high voltage power supply.
- For output control, ten-turn dial indicators give you full local control of the high voltage power supply to drive any type of load under constant voltage or constant current.
- Or you can remote control and monitor the high voltage power supply through Micro HDMI Type-D receptacle.
- Output voltage and current values are displayed so you can stay informed at all times.
- Output voltage meter displayed in 5 digits.
- Voltage adjustment dial with turns-counting indicator.
- Remote control receptacle.
- Remote control indicator light turn on when the unit is in remote mode.
- Constant current mode indicator light will turn on when the HV power supply maintain a constant current output.
- Output current meter displayed in 5 digits.
- Current adjustment dial with turns-counting indicator.
- High voltage On/Off switch.
- Ground terminal. M5 threaded stud.
- High voltage output connector.
- Main power On/Off switch.
- DC input connector.
Constant voltage mode / Constant current mode
Lab Mate high voltage power supply can be operated in either constant voltage mode or constant current mode. These two modes are the two regulating conditions that control the output of the power supply. When it is operating in the constant voltage mode, the HV power supply maintains a constant output voltage that is defined by the operator while the current drawn is varied as required from 0 to the full rated current, which in this case is 1 mA. For this type of high voltage power supply, constant voltage mode is the most common mode of operation.
However, Lab Mate high voltage power supply can also operate in the constant current mode where the output current is regulated as defined by the operator. When it runs in the constant current mode, the power supply maintain a constant current output into a load while the voltage output is varied as required by the connected load.
The feedback circuit for constant voltage mode and current mode are always active and constantly working together to provide continuous output that is always regulated to user’s input levels. However, it is important to note that although both circuits are always active, only one mode is in control at a time to regulate the output. The response time of these circuits are very fast and crossover automatically as needed between the two modes. Also, the HVPS will enter the constant current mode when faults such as overload, arcing and short circuit occur, thus providing protection.
Remote control of the precision high voltage power supply.
Remote control operation of Lab Mate high voltage power supply is possible and you can access the remote features through the remote connector located on the front panel. The connection is accessed through the micro HDMI Type-D receptacle and the remote enable pin will give you full remote control of the power supply.
Lab Mate is built for wide operating conditions so you can do more.
- All electronics inside the high voltage power supply are sealed to give you protection against the environment so you can operate with 10-90% humidity.
- The equipment is thermally engineered with active cooling so you get precision high voltage with great temperature stability.
- Built to produce precision high voltage under ambient temperature range of 0-40 C.
- It is engineered for reliability and built for you, the user, to produce high voltage in a wide range of environments.
High voltage connector.
High voltage connector assembly is included. The high voltage cable and connector assembly is rated up to the maximum rated voltage of 30 kV. The whole cable assembly is shielded with a robust stainless steel shell to provide you an additional safety layer and to help prevent physical damage to the high voltage wire insulation. Another benefit of the ground shield is that it helps to prevent capacitive charging and coupling that becomes problematic when operating above 20 kV.
Battery option for Lab Mate high voltage power supply.
- Battery power package is available for the precision high voltage power supply and that gives you a lot of usage flexibility.
- The rechargeable lithium battery pack is lightweight and the integration kit is small so you can take the battery powered high voltage power supply with you anywhere.
- It will serve you well in emergency situations or field usage where power is not available but you still need to produce high voltage.
- Battery powered high voltage power supply can be electrically floated so it gives you the possibility to generate high voltage in unique situations.
- Battery powered option will give you precision high voltage on the GO!
Applications:
- Electrospray Ionization
- Paper Spray Ionization
- Mass spectrometers
- Detectors
- Electroporation of biological cells
- Acceleration of particle beams
- Acceleration of electrons by high voltage to generate x-rays
- Electrostatic spray ionization
- Fragmentation devices
- Laser technology where electric gas discharges are used for stimulation of atoms
- Medical engineering
- Testing of electromagnetic compatibility
- Testing of electronic components such as capacitors, insulation materials and electrical components
- Electrostatic filters to protect the environment
- General laboratory usage
Safety
Your safety is paramount and rigorous safety practices must be enforced to ensure your safety when working with high voltage.
This power supply produces high voltages and store energy that is hazardous. Physical contact with the high voltage output may result in life-threatening or fatal injury.
Before you turn on the high voltage power supply, always confirm first that the dial indicators are turned fully in the counter-clockwise direction and confirm the turn counting indicator reads 0.
Visually inspect the high voltage output connector and any high voltage connections for unintended touching or electrical shorts.
Always keep a safe distance from the test equipment and apparatus or system under test.
Be extra cautious of any high voltage connections that are exposed. Such live terminals should be shielded and barriers must be provided to prevent accidental contact.
Proper grounding is very important. Ensure that a secure ground connection is made between the high voltage power supply and earth ground.
All ungrounded terminals of the test equipment or apparatus under test should be considered as energized.
The work area for the HV power supply should be kept clean. It is important to put away unnecessary parts and components and to keep them far away from the test area.
The general work area around the HV power supply and high voltage connections must be kept dry.
Always consult with your organization’s health and safety expert.
Warranty
We deliver reliable products and offer a one-year replacement warranty under recommended usage.
Specifications
Input voltage:
- 90 V to 264 V, 47 to 63 Hz, single phase AC.
- Only use provided AC-DC power adapter.
Input current:
1A max at 120VAC.
Output voltage control is programmable from 0 to rated high voltage:
- Locally adjustable from front panel: 10 turn precision potentiometer with dial indicator.
- Remote: externally adjustable from 0 to +10V. Accuracy: 0.5% of setting + 0.2% of rated voltage.
Output current control is programmable from 0 to rated current:
- Locally adjustable from front panel: 10 turn precision potentiometer with dial indicator.
- Remote: externally adjustable from 0 to +10V. Accuracy: 1.5% of setting + 0.5% of rated voltage.
High voltage monitor:
- Front panel: 5 digit LED display
- Remote: 0 to +10V equivalent to 0 to rated voltage. Accuracy: 1% of setting + 0.2% of rated voltage.
Current monitor:
- Front panel: 5 digit LED display
- Remote: 0 to +10V equivalent to 0 to rated current. Accuracy: 1% of setting + 0.2% of rated voltage.
Ripple:
0.01% VRMS of set voltage or less.
Stability:
0.01%/Hr after 3 minutes warmup of high voltage power supply.
Temperature coefficient of high voltage output:
0.01%/°C
Temperature:
- Operating: 0C to +40 C.
- Humidity: 10-90%, Avoid Condensation.
- Storage: -20 C to +60 C.
Input impedeance:
1MOhm
Output monitor impedance:
1 Ohm
High voltage enable:
- Enable = 4V to 10 V.
- Disable = 0 to 0.5V
+10V Reference:
- Max current = 20 mA.
- Accuracy: +/- 0.1%. 20ppm/°C.
Accessories:
Shielded high voltage cable with high voltage connector.
Remote control:
- Enable = 5V to 10V
- Disable = 0 to 0.5V
HVPS Size:
- Width = 50.8mm (2″)
- Height = 102mm (4″)
- Depth = 295mm (11.61″)
Weight:
1.4 kg (3.1 Lbs)
Remote control pin assignments
Pin assignments for Micro HDMI Type-D receptacle located on the front panel for remote connection.
| Pin | Signal | Signal Parameters |
|---|---|---|
1 | Signal Ground | Ground |
2 | Signal Ground | Ground |
3 | Current Program Input | 0 to +10V equals 0 to 100% of rated high voltage. Input impedance is 1MOhm. |
4 | Signal Ground | Ground |
5 | Voltage Program Input | 0 to +10V equals 0 to 100% of rated current. Input impedance is 1MOhm. |
6 | Current Monitor | 0 to +10V equals 0 to 100% of rated current. Output impedance is 1 Ohm. |
7 | Signal Ground | Ground |
8 | Voltage Monitor | 0 to +10V equals 0 to 100% of rated high voltage. Output impedance is 1 Ohm. |
9 | Enable High Voltage | Enable = 4V to 10 V. Disable = 0 to 0.5V |
10 | Signal Ground | Ground |
11 | Remote Control | Enable = 5V to 10V. Disable = 0 to 0.5V. |
12 | +10V Reference | Max current = 20 mA. Accuracy: +/- 0.1%. 20ppm/°C. |
13 | Signal Ground | Ground |
14 | Signal Ground | Ground |
15 | Signal Ground | Ground |
16 | Signal Ground | Ground |
17 | Signal Ground | Ground |
18 | Signal Ground | Ground |
19 | Not Connected |
